Best Portable Table Saw Reviews

The truth is table saws are all-in-one power tools. For one, they allow you to make crosscuts, bevels, and miter cuts on the same table and with the same saw.

Next, you get to work with everything from thin boards to rough-cut lumber.

Portable table saws come with heavy-duty rolling casters. You can pack up and set out for the job within a minute.

Between a stationary table saw and its battery-powered version, the portable model packs mobility, power, and speed in a single package.

Have a look at our best portable table saw reviews to know what the top-tier products are offering.
And yes, we have at least one table saw for any woodworking application you might have in mind. Enjoy!

Image
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)
SKILSAW SPT99-11 10 Inch Heavy Duty Worm Drive Table Saw with Stand, Silver
BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10
Metabo HPT Table Saw, 10-Inch Carbide Tipped Blade, 35-Inch Rip Capacity, Fold & Roll Stand, 8 x 13/16-Inch Dado Capacity, Jobsite | C10RJS
Delta 36-6023 10 Inch Table Saw with 32.5 Inch Rip Capacity
Product Name
DEWALT DWE7491RS
SKILSAW SPT 99-11 Worm Drive
BOSCH 4100XC-10
Metabo HPT - C10RJSM
Delta 36-6023
Rip Capacity
32-½-inch
30-½-inch
30-inch
35-inch
32-½-inch
Motor Quality
Industrial-Grade
Worm Drive
Soft-Starter
Contractor-Grade motor
Contractor-Grade motor
Speed Level
4800 RPM
3650 RPM
3650 RPM
4500 RPM
3650 RPM
Special Feature
Cuts pressure-treated lumber and plywood
Generous outfeed and left support
Gravity-Rise wheeled stand
Makes 2-¼-inch bevel cuts at 45°
3-level T-slot fence for parallel position
Image
DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)
Product Name
DEWALT DWE7491RS
Rip Capacity
32-½-inch
Motor Quality
Industrial-Grade
Speed Level
4800 RPM
Special Feature
Cuts pressure-treated lumber and plywood
Image
SKILSAW SPT99-11 10 Inch Heavy Duty Worm Drive Table Saw with Stand, Silver
Product Name
SKILSAW SPT 99-11 Worm Drive
Rip Capacity
30-½-inch
Motor Quality
Worm Drive
Speed Level
3650 RPM
Special Feature
Generous outfeed and left support
Image
BOSCH 10 In. Worksite Table Saw with Gravity-Rise Wheeled Stand 4100XC-10
Product Name
BOSCH 4100XC-10
Rip Capacity
30-inch
Motor Quality
Soft-Starter
Speed Level
3650 RPM
Special Feature
Gravity-Rise wheeled stand
Image
Metabo HPT Table Saw, 10-Inch Carbide Tipped Blade, 35-Inch Rip Capacity, Fold & Roll Stand, 8 x 13/16-Inch Dado Capacity, Jobsite | C10RJS
Product Name
Metabo HPT - C10RJSM
Rip Capacity
35-inch
Motor Quality
Contractor-Grade motor
Speed Level
4500 RPM
Special Feature
Makes 2-¼-inch bevel cuts at 45°
Image
Delta 36-6023 10 Inch Table Saw with 32.5 Inch Rip Capacity
Product Name
Delta 36-6023
Rip Capacity
32-½-inch
Motor Quality
Contractor-Grade motor
Speed Level
3650 RPM
Special Feature
3-level T-slot fence for parallel position

Top 8 Portable Table Saw Reviews

Whether you are new to carpentry or need a better, beefier table saw, it’s safe to get one the others have used.

To give you a headstart, we have extensively researched the best-selling table saws from reliable brands. And this is how it went:

DEWALT 10-Inch Table Saw DWE7491RS

Featuring a high-powered motor, a generous rip capacity, and a handy rolling stand, this job site table saw rips wood like the boss it is! The saw is packed with our favorite features, and it puts forward an unbelievable speed.

Dewalt is one of the most popular brands for power tools in the market, and you can see why. Let’s start with this portable table saw, shall we? The Dewalt DWE7491RS table saw sports a 10-inch 24-tooth carbide blade.

Compared to a benchtop model, this jobsite table saw is significantly faster with a 15-Amp motor. We also recommend this Dewalt power tool for its rack and pinion fence system. This practical feature allows you to adjust and reposition the fence in a jiffy.

Moving on, you get a 32-½-inch rip capacity on the right and a 22-inch on the left. This way, you have a roomy space on either side. Besides, the saw table (21-⅞-inch x 26-⅜-inch) backs you up with sufficient material support.

The jobsite table saw also offers spacious onboard storage and easy-rolling wheels. It’s designed to be suitable for cabinet-making, framing, and ripping applications. There’s also a riving knife and a blade guard for your safety.

Overall, the Dewalt DWE7491RS is the best portable table saw for us. It single-handedly does the work of a table saw and a miter saw.

Yes, it comes with a miter gauge that allows you to hold the stock at a 45-degree angle. You don’t need a sled for making cross-cuts after all! Last but not least, this Dewalt jobsite model is capable of producing 13/16-inch-wide Dados and rabbets.

Pros

  • 10-inch, 24-tooth carbon fiber blade
  • Max cutting depth up to 3-1/2 inches
  • Effective blade guard system
  • High speed levels up to 4500 rpm

Cons

  • The T tracks are not of the same width across the table

SKILSAW SPT99-11 Worm Drive Table Saw with Stand

This is a high-powered worm drive table saw by SKILSAW, and it offers a bunch of useful features. We especially liked its rack and pinion fence system for making quick, hassle-free fence adjustments. It’s also equipped with a handy dust collection port that collects all the dust in one place.

SKILSAW is popular for its impressive line of power tools. The SPT99-11 drew our attention with its excellent outfeed support. We know for a fact that not all table saws offer one in the same price range.

Another cool thing about this table saw is that you can single-handedly operate the tools. Its easy-rolling stand makes transporting the entire table saw a piece of cake. Otherwise, we wouldn’t bother loading such a rugged device in our car.

Moving on, this worm drive table saw features one-step fence adjustment controls. The fence also locks in securely so that you get neat, straight cuts all the way through. You’ll find its 3-⅝-inch cut depth more than enough for ripping and cross-cutting boards.

The 30-½-inch rip capacity robs you of that extra two inches you get from the Dewalt DWE7491RS. But then again, the Dewalt table saw is neither a worm drive nor does it include the outfeed table.

What we’re trying to say is, between the Dewalt and the SKILSAW model, this one is easier to operate without needing any help. The 24-tooth carbide blade is interchangeable among both saws and, literally, any electric saw that supports a 10-inch blade.

Finally, the smart guard system includes anti-kickback technology and a push stick. Overall, the unit is one of the best portable table saws out there. It misses out on a throat plate insert for making dado cuts.

Pros

  • A worm-drive table saw with high torque levels
  • Ideal for ripping plywood sheets for home improvement
  • Easy rack and pinion fence adjustment
  • Includes a convenient roll cage base

Cons

  • The rip fence might wobble a little without a push block

BOSCH 10-inch Table Saw with Wheeled Stand 4100XC-10

This robust 10-inch jobsite table saw will be an excellent addition to your workshop. Its 4 HP 15-amp motor spins the 10-inch blade at 3650 RPM speeds- achieving a max cutting depth of 3-5/8 inches. However, we’re impressed by this Bosch saw for another reason. It’s the modern soft-start motor.

How many times did you trip the circuit breaker with your old table saw? Well, we certainly had our fair share of electronic mishaps to finally switch to soft-starters.

These table saws are much safer compared to traditional saws because they allow gradual acceleration. You can avoid accidental startups and expect more durability out of the table saw.

We couldn’t have enough of its SquareLock rip fence. It locks into the guide rail in an iron-clad manner and allows you to rip dense lumber pretty easily. The cut quality stays true to your design and comes out straight even after successive passes under the saw blade.

Now, insert Bosch TS1007 dado throat plates for making versatile wood joints. There’s a pre-cut blade locator on the contractor table for tricky compound cuts. Bosch also included a riving knife and anti-kickback pawls for safety.

The table surface can handle huge lumber racks, yes. Moreover, you can feed 4-foot-wide lumber into the blade- a feature we thought to be much impressive for a jobsite table saw. The auxiliary fence makes cutting narrow workpieces a breeze.

Next up, we have the gravity-raised stand. Between an ordinary jobsite table saw and the Bosch 4100XC-10 saw, the latter is the modern-looking unit. Its key takeaway is you can set the table saw up from its folded position in a single step.

Not to mention, the table saw is completely jobsite-ready with its supersized 8-inch, threaded rubber composite tires.

Our one and only issue with this portable table saw is that it’s an expensive unit. Although, its cutting-edge specs make the price tag seem reasonable enough.

Pros

  • Features a soft-start motor for better durability
  • Rips up to 4-foot-wide lumber with stock blades
  • Gravity-Rise wheeled stand for better mobility
  • Easy-to-view blade path and anti-kickback pawls

Cons

  • The table saw body is quite heavy to lift up

Metabo HPT – C10RJSM Table Saw

Featuring a 40-tooth carbide blade, a brawny 15-amp motor, and an ideal 35-inch rip capacity, this Metabo HPT table saw takes the cake. It’s capable of making 3-⅛-inch deep cuts at 90 degrees and 2-¼-inch deep bevel cuts at 45 degrees.

That’s right; the C10RJSM is one of the best portable table saws that can alternate between two cutting styles. Moving forward, the package includes a push block, two wrenches, and miter gauge assembly points. The push block keeps you focused on the Woodstock and feeds it nicely into the blade.

What happens when you don’t use a push block is you end up using both of your hands. It shifts focus too often and doesn’t feel as comfortable. Additionally, the table measures 28-¾ inches long and 22 inches wide. It’s backed up by outfeed support so that thinner boards don’t sag and catch into the running blades.

You can attach a riving knife behind your saw blade just to be safe. Metabo HPT doesn’t come with a riving knife, though. The blade guarding system, however, puts forward an infallible performance. You might need to take it off before ripping dense Woodstock, but it keeps you fully covered in the day-to-day tasks.

We liked the fact that everything about our favorite blade is adjustable- from its height to angle. The saws are capable of producing bevel cuts and miter cuts. And these applications require a change of height and blade angle.

If you ask us, we like 40-tooth carbide blades for cross-cutting wood with our saws. Personally, we think these blades are a bit too slow for rip-cutting hard materials. But one portable table saw from Metabo HPT was enough to change our minds.

The speed of these saws maxes out at the 4500RPM ceiling. That’s much higher than the average, which is 3650RPM.

Pros

  • Max cutting depth of 3-⅛ inches for straight cuts
  • Comes with a 10-inch 49-tooth carbide blade
  • The telescoping table extension adds 22 inches on the left
  • Oversized emergency power switch for immediate shut-off

Cons

  • Average plastic components

Delta 36-6023 Table Saw with 32.5” Rip Capacity

If you’re looking for a multipurpose table saw with rolling stands, you should check out this portable saw unit by Delta. There’s nothing new about the whole rack and pinion system. But the table saw can be your gateway to fantastic woodworking projects. And here’s why!

Previously, Metabo HPT had done a splendid job with their table saw- packing the best-in-class safety features as well as a fine-toothed blade. Little did we know, the Delta 36-6023 offers most of these features along with something totally unique.

The saws are equipped with a 13/16-inch and 8-inch stacked dado capacity. The main stock capacity is 32.5 inches for equally wide lumber. You can feed different types of lumber into the saw blade, such as hardwood, green pine, and pressure-treated boards.

A point to note- the saw table surface will feel a bit grippy at first. You’ll need to break it in and coat it with wax for proper maintenance. Installing blade stabilizers is an option, but they can weigh the blade down.

The good news? Delta is one of those portable table saws that rise up to the situation. It handles super-dense stock with great care and minimum kickback. Honestly, it’s nothing a couple of push sticks and a featherboard can’t fix. The blades power through thin boards and save your valuable time.

Now that we’re on the topic, let’s introduce you to another attractive spec of the Delta portable table saws. Their straightforward assembly allows you to use the saws out of the box.

However, the Delta table saw does miss out on one feature or two. The absence of a rear outfeed and an auxiliary fence instantly comes to mind. If you badly need this feature at your job sites, we suggest you get the Bosch 4100XC-10 portable table saw.

Pros

  • A massive 32.5-inch rip capacity
  • Collapsible design and a handy dust collection system
  • Three adjustment tabs for better rip capacity
  • Makes 8-inch-wide dado cuts and rabbets

Cons

  • The miter gauge is not that durable

Bosch Power Tools 4100-10 Table Saw

Well, if Bosch 4100-10 looks remotely familiar to you, chances are you haven’t forgotten the Bosch 4100XC-10 table saws we reviewed a while ago. This one is a better, beefier version with a much larger table for your comfort!

For starters, the unit offers cutting-edge security tools for job sites. You’ll get an incredible motor performance once you pair its anti-kickback pawls with the Smart Guard System. By the way, both of these are brand-new saws in the Bosch portable jobsite table saw line.

Its square-shaped contractor table runs 29 inches long and 21-½ inches wide. Compared to Bosch 4100XC-10, we like its roomy table slightly better.

Why slightly- you ask? First, its 25-inch rip capacity falls behind the standard 35-inch measurements. Even when you use up the space on the left, it doesn’t go any wider than 29 inches.

The good news is that you can mount the riving knife in three different positions. Well, the capacity can be a couple of inches shorter; but it doesn’t mean the safety specs are any less impressive.

With the portable Bosch saws, experiencing blade-pinching and kickback is highly unlikely. Anyway, the contractor table also features impeccable guide rails- the places where the SquareLock rip fence can glide along and lock in position.

It’s not complicated at all simply because it does most of the clamping and pushing so that you can operate the saw with one hand.

You have the option to lock its miter gauge head at various angles for better cross-cutting and mitering. The height-adjustment knob can not only elevate/lower the blade but also tilt it from zero to 90 degrees. Finally, the table extension was our favorite spec next to the motor in the latest Bosch table saws.

The 4HP 15-Amp motor stays the same in both Bosch table saws. We’ve become quite fond of the soft starter motor that this unit comes with. For one, it supports variable speed. It can significantly increase and decrease the RPM levels, giving you better control!

For safety, the internal circuitry comes complete with overload protection.

Pros

  • Includes an extension table for accommodating larger boards
  • A single elevation wheel for better user experience
  • The motor supports variable speeds up to 3650 RPM
  • Comes with a miter gauge and anti-kickback pawls

Cons

  • A little difficult to adjust the rip fence and the blade in parallel

SAWSTOP 10-inch Jobsite Saw Pro JSS-120A60

Behold, this portable table saw puts forward the patented SawStop safety mechanism. It can actually stop the spinning blade under 5 milliseconds should it touch your skin at any given point.

Taking a step back, we were more than happy with the guarding system on our Bosch 4100 10-inch jobsite table saw. For example, its blade guard assembly consisted of a variable-riving knife, anti-kickback, and a tool guard. But the SawStop is a much safer option!

First, its patented finger-protention feature is a sophisticated one in its own right. The blade generates an electrical signal when it’s in use. In the meantime, if your finger accidentally touches the whirring blade, the signal instantly shifts.

It’s because our body is conductive, to begin with. Now, the signal prompts an aluminum brake to spring up into the blade path from below. Therefore, the blade stops moving, and its angular momentum drives the blade into its slot. As a result, no further blade contact occurs.

What’s surprising is that the whole process happens under 5 milliseconds which is 0.005 times shorter than 1 second! If you want your new table saw to be the safest-ever unit, you’ll love the SawStop Saw Pro for this reason.

Moving forward to the technical specs, the Saw Pro JSS-120A60 comes with a standard T-slot fence. It also features ErgoLock- a sturdy lock that clamps the fence to the T-rails.

Another interesting feature is that you get a shallow T-rail and a deep T-rail for cutting thin and dense workpieces. From there, you can build shelves, cabinets, and gorgeous pieces of furniture.

Lastly, its active dust collection port makes cleanups a breeze for you and keeps you focused on the line of the blade. There are anti-kickback pawls, a splitter, and roomy onboard storage as well. And yes, you can make excellent 13/16-inch-wide dado cuts with an 8-inch diameter. Rabbets too- if you know how!

Pros

  • Comes with a T-slot fence and T-rails of two widths
  • Patented Sawstop technology prevents accidents
  • 3-⅛-inch max cut depth
  • Spacious onboard storage and active dust collection

Cons

  • Unimpressive aluminum miter gauge

Milwaukee Electric Tools 2736-21HD Table Saw

This Milwaukee table saw is a must-have power tool for professional woodworkers. It’s a cordless device for ripping wood in the fastest possible time. We like the fact that this cordless table saw produces the same output as an electric 15-Amp model.

Its RPM levels beat that of many corded-electric table saws in the market. For the most part, its high-output HD12.0 battery pack delivers 50% more power than the standard Redlithium HD pack. The table saw also runs twice as cool as any other battery-powered unit with stands.

Not to mention, the battery is fully protected against demanding jobsite conditions. Therefore, this contractor table saw is suitable for professional remodelers and carpenters who want more versatility in their power tools.

Paired with the latest Redlink Plus Technology, this Milwaukee table saw withstands overload, over-discharge, and overheating. Although, we wouldn’t put it to test if we were you!

We’re a big fan of the ripping and crosscutting capacity of Milwaukee saws. This table saw is powered by a Powerstate brushless motor. It uses a general-purpose Milwaukee blade for sawing solid lumber and plywood. When you wear it down, you can replace it with another 8-¼-inch blade with an identical arbor.

Altogether, it’s an excellent jobsite table saw with a crazy-high output level and speed. On top of that, it’s an entirely cordless model with attached stands. You can roll it virtually anywhere. You’ll find its tool-free adjustments of blade guard and riving knife quite useful.

Pros

  • An 8-1/2-inch jobsite table saw
  • Runs 50% cooler and faster than standard battery-powered models
  • Protected against overload and overheating
  • Tool-free blade guard and miter gauge adjustments

Cons

  • Doesn’t come with stands

What to Consider Before Buying a Portable Table Saw

A table saw is speedy, powerful, and versatile. Come to think of it; the tool is anything but cheap!
Now, the question is- what makes the best portable table saw?

It’s definitely the one with ample motor strength, power handling, high-speed levels, and solid cut quality. Below is the list of things that make an otherwise ordinary table saw the best-of-its-kind!

Rip Capacity

The rip capacity is the maximum available space between the edge of the fence and the center of the saw blade. Naturally, portable table saws with greater rip capacity will allow you to saw chunky pine and poplar.

35-inch is the standard size for mid-range models. However, you can do better than that.

All portable table saws specify a left rip capacity. The trick is to shift the fence a couple of inches to the left. And voila! You have more clearance on the right side for ripping wider lumber.

Miter Saw Applications

If you’re in carpentry for long enough, it’s safe to say you already own a handsaw and a jigsaw. Now that you’re adding a portable contractor table saw to the arsenal, asking you to get a miter saw is a bit much.

This is probably the reason why portable table saw models are compatible with most miter gauge applications. In fact, a high-end table saw can replicate the same professional cuts of a miter gauge.

Metabo HPT C10RJSM and Dewalt DWE7491RS are our two favorite portable table saws with full-range miter gauge capabilities. They come with a miter gauge and support its different assemblies.

Motor Strength

Like every other power tool, the performance of your portable jobsite table saw will depend on its motor capacity and output level. An average one will heat up quickly and have an underwhelming torque, to begin with.

This is why most worm drive table saws in the market feature a high-torque motor. We’ll get down to the details right away. But first, remember that the HP ratings and amps will depend on your work and power requirements.

For example, a 1.75 HP motor is pretty decent for a hobbyist. But we’re guessing you want something stronger. Professional woodworkers will almost always use a 3+ HP motor.

Soft-starters are good in the sense that they extend the life of mechanical tools and allow gradual accelerations.

Speed

While high operating RPM levels are great, it doesn’t mean your favorite table saw will rip boards any faster. You have to consider the thickness of the board to compare two different table saw models. An acceptable speed level for medium woodworking applications is 3650 RPM. You can do it with a low RPM level if your motor makes it up with torque.

Blade Size

Nothing beats a 10-inch 24-tooth blade when it comes to ripping lumber. Your 40-tooth multipurpose blade will work, but it will take longer. We set our 40-tooth blades aside for cross-cutting applications only.

As for the blade length, choose the exact blade specifications your table saw can handle. You can go for one size down, but be sure to check the arbor size of the new blade, just in case.

Finally, consider the loss of cut depth with a smaller size blade and see if it fits your purpose.

Specialty Cuts

Dado blades are the most exclusive accessories a table saw can offer. You can make rabbet cuts with a dado blade. If the unit you like isn’t currently offering any, you can always buy a Dado throat plate for a few bucks.

These joints are used for adding compartments to bookshelves and cupboards. You’ll also find them at door panels and drawer bottoms.

As for mortise and tenon joints, pair handmade or store-bought jigs with your contractor table saw.

Favorite Accessories

We like the fact that table saws with stands include several tools in the package. Units like Metabo HPT make sure you can get the saw started right out of the box.

To give you an idea, it comes with a push block, a blade guard, a miter gauge, a folding stand, two wrenches, and a super handy outfeed table. Pretty cool, right?

Additionally, portable saw models with T-slots and T-rails are the most sought-after units, in our opinion. You can clamp the rip fence down on these T-Tracks and get a stable placement every time.

Featherboards, hold-downs, and clamping jigs need to attach to T-rails before you can even use them.

Safety Features

Look for a table saw with a reliable blade guard assembly. You should be able to remove it in a single step and clamp it back on when necessary.

However, blade guards can’t actively protect your fingers. They serve the same purpose as a riving knife which is to prevent sudden kickbacks and binding.

Table saws that feature a SawStop are hands down the safest units. For one, the SawStop mechanism stops the blade from going Fruit Ninja on your fingers. And two- wait, wasn’t that good enough?

Table Saw Terms and Explanations

While most contractor table saw models are pretty simple at their core, the associated terms can rile you up!

Don’t worry. We’ll be breaking down a few table saw vocabs below. As for the rest (we doubt we left anything behind!), you can pick them up along the way.

Push Stick

A push block or a push stick presses down on the workpiece from above and ensures user safety. The difference between a push stick and a featherboard is that push sticks are safety-oriented, while the latter exclusively prevent kickbacks and uneven cuts.

Blade Guard

Now, a blade guard is a removable accessory that protects your fingers from unwanted accidents. Professional carpenters rarely use a blade guard because it blocks them from sawing large boards.

Riving Knife

A riving knife sits at the back of the blade. Its main job is to push the newly-cut pieces apart from each other until the whole board is sawn into two.

This tool is an upgrade from traditional splitters, considering how it eliminates blade-pinching and kickbacks.

Saw Stop

This is an important safety feature for all stationary, contract, and jobsite table saws. It’s a smart mechanism that stops the whirring saw blade the second it comes in contact with human skin. Usually, it takes up to 5 milliseconds to go into effect.

T-tracks

Well, these are guide rails for the rip fence, and they fit exclusively in T-slots. Many electric saw models use T-tracks on their tabletops. A T-slot fence locks into the track with a clamp that stops it from wobbling.

Miter Gauge

A miter gauge is a typical table saw accessory that holds the workpiece at a pre-set angle. It mounts on miter slots on the table and allows the saw to produce beveled or compound cuts. By the way, the miter slot should be completely parallel to the blade.

Dado Blade

A dado blade cuts grooves inside a board which is essential for wood joinery. With a stack of dado blades, you can cut not only dados but also rabbets, mortise, and tenons.

How to Use a Portable Table Saw

Rip-cutting wood is the most basic table saw application. And beginners should start with straight rip cuts rather than cross-cuts and dados.

Did you know it takes three simple steps to rip wood with a portable table saw? Find out more below!

Step 1: Position the Blade

First, make sure that the table saw is unplugged. Loosen the arbor nut with a wrench and position the saw blade inside. The blade should rotate towards your direction in a downward motion. So, the teeth should be facing the saw. Tighten the arbor nut and move to the next stage.

Step 2: Adjust the Rip Fence

The rip fence stays firmly secured with a locking lever. Release the lever so that you can move the fence. Consider the width of your workpiece and lock the fence at that exact point. The material should be tightly pressed against the fence. So, the less space between them, the better.

Step 3: Plug-in the Table Saw

As for the final step, start by securing the workpiece in position. Remember to keep it a couple of inches behind the blade.

Turn on the switch and wait till the saw blade reaches your pre-set speed level. Now, guide the material into the blade with both hands.

Use one hand to keep the material flat on the tabletop and the other to push it forward.

This is how you make neat rips with your brand-new table saw! Don’t hesitate to use blade guards, featherboards, and push sticks during the operation.

Frequently Asked Questions

What are the benefits of a worm drive table saw?

A worm drive table saw is ideal for high-torque applications. For example, when you’re ripping thick stock, you need more motor strength than speed. The loading capacity on a worm drive is also much higher than the alternative sidewinder.

You should consider easy fence adjustment, safety features, onboard storage, and rip capacity to get the most out of a worm drive.

What is the real purpose of a riving knife on table saws?

A riving knife pivots on the arbor of the table saw. When you push the stock into the blade, the riving knife moves along and keeps the two freshly-cut sections separated. Otherwise, they tend to close up, pinch the rotating blade and cause kickbacks.

How to make wider rips with my jobsite table saw?

A saw’s rip capacity determines the acceptable width of your material. However, if you want to make wider rip cuts with table saws, you must use the space you have on the left side.

You need to shift the fence to the left, leaving a couple of inches of clearance from the edge. It clears up more usable space in between the saw blade and the rip fence. This way, you can cut boards twice as wide.

How does a push stick help with table saw applications?

Cutting longer boards on your portable jobsite table saw is difficult. You need an extra pair of hands to deliver the right amount of downward, inward, and forward pressure.

This is why most woodworkers use push sticks with their favorite table saws. You need one push stick for pressing the lumber down to the table and a second one for feeding it into the saw blade.

How can I make dado cuts without a dado blade?

First, draw the dado outlines on a fence extension with a pencil. Align the workpiece with the lines on the fence extension, and follow them with the miter gauge.

Now that both outlines are kerfed, make repetitive passes in between the kerfs until the middle section clears up. The finished dado cut should match the thickness of the same board.

Conclusion

We searched high and low for easy-to-use, safe yet powerful table saws with stands. And we’re confident that Bosch 4100XC-10 checks all the boxes.

The table saw features a soft-start 4HP motor and multiple cutting styles. It also maintains sufficient cutting speeds (up to 3650 rpm) under heavy load.

We like it for its easy jobsite mobility and reliable blade guard system.

Dewalt DWE7491RS is the speediest one from our best portable table saw reviews. It sports a cutting-edge rack and pinion fence system, rolling stand, and high-quality accessories. Thanks for reading!

Last update on 2021-10-16 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment