best aftermarket table saw fence 2018 | Buying Guide of 2021

Looking for an aftermarket table saw fence? Rejoice! You have come to the right place. We have the best table saw fences compiled for you with a carefully curated buying guide!

Now tell us, why do you need a table saw fence? Perhaps you want to add a whole new tier in your functionality or a sustainable balance in your table saw fence.

Well, most of the frequent woodworkers strive for precise cuts with ample rigidity and permanency.

However, some of them just want to change the old one for better facilities and experience — no matter what you are rooting for, we make sure to serve you the suitable ones! So, without any further speculation let’s dive into the review and see what’s ideal for you.

Best Choice
Best Value
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right
Delta, 36-T30T3, 30 in. DELTA® T3 Fence System
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right
Delta, 36-T30T3, 30 in. DELTA® T3 Fence System
Best Choice
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right
Vega U26 Table Saw Fence System: 36-Inch Fence Bar, 26-Inch to Right
Best Value
Delta, 36-T30T3, 30 in. DELTA® T3 Fence System
Delta, 36-T30T3, 30 in. DELTA® T3 Fence System

6 Best Aftermarket Table Saw Fence Reviews

Here we will be reviewing 6 best table saw rip fences for the money! All of them yield individual specialties while accomplishing your various cutting needs.

1. Incra MITER1000SE With Telescoping Fence

Incra MITER1000SE With Telescoping Fence

We assume that you already know about Incra and their innovative box-joint-making jigs. They gracefully maintain the quality and competency in their assortments.

Just like Incra’s miter gauge special edition, this one not only delivers precise cuts with optimal accuracy but also stands on your customizing requirements. While having a table saw fence is crucial, ensuring a suitable table saw that allows stability is also important.

Here when you have this saw fence, you don’t need to worry about the adjustments.

It’s extraordinarily versatile and offers an 18 to 31-inch telescoping incremental miter fence. This helps to facilitate superior control over an array of stock widths to handle a variety of stock widths.

It can telescope out from a very close length (18 inches) to a prolonged one (30 inches). Besides, it provides a unique flip-stop system that instantly locks and creates a welcoming environment for perpetual cuts. Also, it secures the placement by flipping out of the way without any intricacies.

On the flip hand, this miter gauge is comprised of 42 detents in 5-degree augmentations amid the whole 180 degrees. In addition, this feature enables a special stoppage on two different perimeters, such as 22-1/2 and 67-1/2 degrees for utmost accuracy.


  • Stainless steel primary scale for precision and accuracy
  • Suitable for custom-cuts ( six disks along the length of the slot bar)
  • All detents are gauged by angle indexing teeth
  • Comes with a vernier cursor for 1/10th degree adjustability
  • 41 laser-cut V-stops  For maximum accuracy at the common angles


  • Need to attach a woodblock (while it should come with miter gauge or bar)

2. Vega U26 Table Saw Fence System

Vega U26 Table Saw Fence System

Secondly, you have Vega U26, which is another prominent brand that distributes high-quality equipment. In fact, their table saw fence is currently trending all over the internet marketplace.

The sturdy steel material is the very first thing that will drag your attention. Undoubtedly it’s built to last.

Even after multiple wood churning sessions, this machine doesn’t rust over or damage. In fact, it’s supremely flexible with a wide range of table saws. You don’t have to confine your projects in front railing as it allows rear and front railing both.

Thus your fence clamping events feel easier than ever. Besides, you will have sufficient room to strike an arc for back and forth movements to both left and right sides.

You will get 8 inches of the left side, and 26 inches for the right of your table saw blade. With maximum space, you can craft rips as per your preference by precision at any spectrum.

Now, as we said that it’s compatible with most of the table saws, we should also mention the fact that you need to poke some holes in your saw for certain models.

Because not all of them are open to incorporate with your saw fence, for certain model options, you need to make some modifications. Apart from this extra hassle, you will hardly find any drawbacks.

The smooth yet reinforced cuts make your cutting journey enjoyable. Moreover, you will have the knob adjustment availability to prevent inadequate measurements.

Hence, with vega U26 set the accurate measurement and safeguard your fence locking mechanism. With the help of the fence locking system, you can work with superior rigidity and combat dodging problems. Hence repetitive cuts without interruption isn’t a dream anymore.


  • Easy installation within 15 mins
  • Strong metal build
  • Versatile fence saw with supreme compatibility
  • Lightweight


  • Only two brackets for rail holding

3. DELTA T3 Fence System

DELTA T3 Fence System

There are very few products that can trump over delta 36-T30T3 in terms of accuracy. It might be crafted for occasional DIY workers, but at the range of 27 inches table sizing, it can deliver seamless cuts with precision.

However, the best part of this equipment is its customization availability. Here as the railing system is confined to specific cutting jobs and table saw models, a sheer modification won’t be a bad idea.

By drilling some extra holes, your table saw fence can provide significant accommodation to your respective saw model. And luckily if you already got a delta table saw, then this saw fence would easily adapt to the setup (regardless of what delta table saw model you own).

In addition, you will get a perfectly calibrated measurement gauge by which you can easily determine how much space you will need for cutting multiple batches at one stretch.

Also, the measurement tape helps you acquire the proper reading for your cuts. Now comes the user’s convenience part, where we assure you about the maneuverability. Well, when you have DELTA, half of your labor is priorly done as it’s extremely easy to move.

The moment you secure the position and activate the 3 point locking system it won’t wobble or budge even after repeated cuts without a break.

On top of that, if you want your fence parallel to the blade, then the two hairline pointer will do the job for you.

Having a once-piece railing along with a square tubular cross-section, this table saw fence ensures optimal balance and rigidity.

Moreover, the straight cuts, strong metal build, lightweight profile, and high accuracy are guaranteed when you compile delta 36-T30T3 in your arsenal. Lastly, the cost-effectiveness contrary to these exclusive features is like a cherry on top.


  • Easy installation
  • Compatibility with all delta table saws
  • Smooth gliding without any fall
  • Steal for the money


  • Supported sizes could be better

4. CARTER MAGFENCE II Universal Magnetic Fence

CARTER MAGFENCE II Universal Magnetic Fence

Okay, now this one is strategically made for dummy crafters. The entire build facilitates easy assembly, better maneuverability, and absolutely effortless usage.

No wonder it’s one of the favorite underrated saw fences for people who want a beginner-centric range in their collection.

We must quote that it’s entirely different from other table saw fences in terms of construction, installation, and usage.

Let us tell you why.

Carter speaks for the name that says universal magnetic fence as it employs compelling magnets to secure the table fence at its right place.

As you know, the magnet adheres to metal surfaces in a blink of yours similarly your fence will attach to every ferrous and non-ferrous metal base effectively. Needless to say, it’s one of the best table saw fence for rookie woodworkers.

Now a lot of people raise questions on the application process for this fence. Well, using it is an absolute breeze because you just need to mount it on the top of your surface or the tabletop then fasten the fence at the appropriate position.

And here, you don’t need to mess with the screws and drilling hassle as the entire action is done magnetically. Furthermore, the fence is 3-½ inches by height and 16 inches by length, incorporating numerous T-slots.


  • Ideal for beginners
  • Easily detachable
  • Fits on any tabletop
  • Budget-friendly
  • Supremely lightweight
  • Aluminum extrusion
  • Switchable magnets for superior flexibility


  • Only two magnets

5. Dewalt DW745 Table Saw Replacement Fence

Dewalt DW745 Table Saw Replacement Fence

Finally, a competent table saw replacement with wear and tear-resistant caliber by its sturdy aluminum build!

Dewalt peddles, one of the best tables saw fence systems to meet individual crafting needs especially. Just like this model which is compatible with the table saws with 10 inches range.

At this rate you can work with any table saw model along Dewalt DW745 saw fence. However, if you want to avoid frequent replacements and inappropriate cuts then check the fence sizes before you make a purchase.

It will help you to bring the perfect fit for your table saw model.

Now about the rip capacity, Dewalt ensures delivering neat and precise cuts as long as you remain careful with application because this fence tends to break due to heavy cutting sessions.

Hence make sure you be a little gentle with this little monster to churn those evil woodblocks. Besides, the installation is effortless for an aftermarket table saw fence.

You don’t need to waste a lot of time drilling down holes and nudging the screws all while. Within a very short time, the installation will be done as you just need to align it accurately to the surface.

Apart from these attributes, it fits perfectly and ensures increased stability. Undoubtedly it’s another inexpensive fence model for your expediencies.


  • Quintessential fit for Dewalt saw model DW745
  • Withstands wear and tear
  • Easy installation
  • Budget-friendly


  • Lacks universal compatibility
  • Inferior rip capacity

6. KREG KMS7102 aftermarket Table Saw fence System

KREG KMS7102 aftermarket Table Saw fence System

Lastly, we have KREG precision miter gauge that comes with a brass pin. It lets you do quick alteration between positive stop angles.

Apart from being a factory-calibrated tool, this one also ensures providing you clean and precise cuts on the go.

First thing first, the packaging arrives with all the necessary screws and adjustment tools that you need for assembly. Secondly, you will get an in-depth instruction manual where everything is perfectly stated about the installation. It will take less than an hour to install it properly and get into action.

Moreover, this one has aluminum extrusion so that it withstands intense cutting sessions without any internal damage. Now about the compatibility, it’s not something exceptional, but yeah, you can associate most of the entry-level table saw with this fence.

Just make sure you got the measurements right before cutting something at a stretch.

One thing that might feel a little bit exhausting to you is the “drilling” process, where you need to nail all the holes with the screws.

Furthermore, it has positive stops at multiple angles, such as 1,10,22-1/2,30 and 45 degrees. This feature permits you to have the utmost control over your tool and obtain enough rigidity.

It doesn’t provide any extraordinary locking mechanism, but once it’s perfectly assembled, you don’t need to worry about its stability or so. On top of that, this table saw a fence consists of a 24-inch bar with 5 bar adjusters that help you eradicate the play between the miter slot.

Also, the 24-inch fence section has a patented swing stop to hold your desired measurements precisely.


  • Durable construction
  • High visibility red line to set the swing stop
  • Various adjustment bar
  • Gauge marked with diamonds every five degrees for clarity
  • Affordable


  • Not portable

What Is a Table Saw Fence System?

A table saw fence system allows you to align the wood parallel to the blades so that you can get accurate cuts with precision.

There are plenty of table saws that come along with a fence that fits with it properly. Whereas some other table saws require a saw fence to be attached separately.

You can also purchase a table saw fence to increase the rigidity as it comes with a locking mechanism as well. So! long story short, if you want to avoid improper cuts then the table saw fence system can be your armor.

What to Look for Before You Buy an Aftermarket Table Saw Fence System?

While shopping for the ideal table saw fences, you might feel baffling as a beginner. Not having enough knowledge about saw fences and how it affects the entire project can also be the reason why you need a buying guide. Hence check out the most crucial facts to look for before you buy.

Rip Caliber

First thing first, you need to inspect the rip quality. Because the big advantage of these aftermarket saw fences is that you can choose the perfect rip size focusing on your various needs.

Thus, as you are open to deciding, you should latch on to it without any second thought. Here the rip caliber decides the length and depth of one single cut or tear.

While looking for the ideal rip capacity, make sure you have a whole pre-planned spreadsheet or list of your future projects.

This will help you to make a one-time investment. Knowing what kind of projects you will be working on in the forthcoming days allows you to buy the perfect saw fence with a suitable rip size.

Table Saw Size

Secondly, you have to measure the table saw you have. Because the size of your table saw will determine the standard size of your saw fence. Your saw fence is supposed to fit into the table saw proportionately.

For instance, some table saws require small fences such as 27 inches, whereas some require long ones as 42 inches or more.

Although there are table saw fences that come with a universal size and shape that pretty much goes along with every table saw or can be customized by drilling down a few holes on the railing.

Make sure you are aware of the table saw size before you purchase a fence. Or you can also opt for a versatile fit.

Weight Quotient

Never buy an outrageously heavy fence. It’s not only hard to move but also kills all your energy.

Your table saw fence should be lightweight so that you can slide it with ease and utmost mobility.

However, by saying lightweight, we didn’t refer to something which is excessively light.

Because extra light fences are often susceptible to get damaged after a few cutting sessions, so, the ideal weight would be something “in-between” not so heavy neither too light. A moderate weight within 30 to 60 pounds will do just fine!


The material that is used for your table saw fence construction will depict the quality or robustness of the tool.

Thus, the material should be of high quality and immune to corrode and tears. For instance, aluminum and steel are the best materials for your table saw fence. These materials ensure permanency and withstand rust and tears effectively.


Lastly, check out the installation process. Ask the manufacturer or see the customer reviews to get pertinent answers.

Also, you can check the demonstration video where the installation is clearly displayed.

If there’s any process that made you feel reluctant and intimidating, then you should look for other options that come with easier installation. Moreover, make sure that the required time for assembling the tool isn’t time-consuming. Thus your time and energy both will be saved.

Frequently Asked Questions

Check out these frequently asked questions to eliminate further queries.

Why should I buy an upgraded table saw fence?

An upgraded table saw fence comes with extraordinary features, such as the locking mechanism, better rip capacity, portability, accurate cuts, easy installation, permanency, etc at an affordable price. Consequently, buying an upgraded table saw fence will be the only smart decision.

How do I extend my table saw fence?

You can buy a rip-fence extension.

Benefit of aftermarket table saw fences?

There are numerous benefits of the best aftermarket table saw fences. The most significant ones are,

  • You are allowed to upgrade your material composition
  • Enhanced durability
  • Rigidity is confirmed
  • No more improper and deformed cuts
  • There is a huge probability to get warranties
  • You can install them easily without a professionals help
  • Locking mechanism that eliminates the risk of glides and fall or any accidental cuts

Things to look for in replacement table saw fences

  • The four important things to look for in replacement table saw fences are,
  • Fence that slides parallel to the blade for accurate square cuts
  • A fence with the ability to make subtle or narrow cuts
  • It should move smoothly without any break so that you can make repetitive cuts
  • Make sure it comes with larger markings for clarity

End Quote

No matter how expensive and competent your tool is, you are bound to take safety measurements by yourself. Make sure you wear safety clothes, eyewear, and gloves before getting into the project.

Thus, you can avoid chronic to minor injuries. To conclude, we hope that you have made this far to this article and found the ideal deal for you. Also, don’t forget to drop an honest review after making a purchase.

Last update on 2023-01-13 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment