Best Table Saw Miter Gauge Review – 2021

Does it still feel like a dream to have accurate cross-cuts while handling a DIY project? Well, not anymore! Your visions have come to life!

In today’s guide, we will introduce you to the 7 best tables saw miter gauge of all categories. Be it a portable one or a hybrid one; we ensure to represent each of them just so you can have a suitable miter gauge for your various needs.

However, while looking for the best miter gauge systems everything seems too good to be true. The nuanced differences are hard to comprehend.

Hence, we have compiled a review of each product with a small brief, specification and pros & cons. So, let’s wade through it then!

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
INCRA MITERV27 Miter V27 Miter Gauge
POWERTEC 71005 Deluxe Table Saw Miter Gauge
SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
INCRA MITERV27 Miter V27 Miter Gauge
POWERTEC 71005 Deluxe Table Saw Miter Gauge
SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
INCRA MITERV27 Miter V27 Miter Gauge
INCRA MITERV27 Miter V27 Miter Gauge
POWERTEC 71005 Deluxe Table Saw Miter Gauge
POWERTEC 71005 Deluxe Table Saw Miter Gauge
SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708

7 Best Table Saw Miter Gauge In 2020 Reviewed

Here we go with our unbiased review of best-rated table saw miter gauge. And at the very end, we have a compiled a buying guide to resolve your shopping dilemmas.

1. Fulton Precision Miter Gauge with Aluminum Miter Fence

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
  • The Fulton Miter Gauge is a high quality, well thought...
  • The .200” thick, adjustable, solid aluminum head is...
  • The head is mounted to a solid steel miter bar that...
  • Made from a single piece of extruded aluminum, this...

Fulton is the new big thing for all potential woodworkers. In recent times, it’s one of the top trending tables saw with all-star ratings.

And seemingly all the customers are overwhelmed by its impeccable service. With that being said, let’s talk about the aluminum miter saw.

This woodcutting fence has a superior quality that ensures accurate and precise cuts in no time. Initially, the overall build is quite durable.

The blend of premium aluminum and steel makes sure that it doesn’t rust or tear over time. In fact, the aluminum flip-lock system facilitates constant cuts without any intricate adjustments.

Just simply drive the flip stop lever to your desired spot and secure it on the position right away.

The lock system will help you combat sudden falls and improper cuts. Besides, the aluminum head is geared with 13 positive stop holes.

It’s one of the most cherished features that reside in an ideal table saw fence. The positive stop allows you to safeguard the exact angle you want to cut.

For instance, few common angles like the 90 degree has 1 hole whereas the six holes on both sides dwell at 22.5, 30, 45, 60, 67.5, and 90 degrees.

The convenience of this feature is irreplaceable as most of the woodworkers find it handy and relevant. Next, you will have the head incorporated with a robust steel miter bar.

This also includes a slot while having the measurement of ¾” x 3/8”. The attached T-slot eliminates the risk of accidental lifting during the stock feeding.

Moreover, if you want some detailed cuts, then rejoice! This miter saw permits you to assemble the fence close to the saw blade, so you get utmost control over the cuts and satisfy your woodcutting standards.


  • Fence edges are cut accurately at 45 degrees
  • Flip-lock system for constant cuts without any break
  • Deactivating the flip stop system is more than easy
  • Left/right reading  with the sticky measuring tape
  • Easy to install
  • Superior portability
  • Cost-effective


  • Installation is easy but takes too long to form

2. Incra MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop

INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
  • Engraved stainless steel primary scale for precision...
  • 41 laser cut V-stops for extreme accuracy at all...
  • Patented GlideLOCK miter bar with 6 expansion points...
  • 18- to 31-inch telescoping incremental miter fence for...

Looking for a table saw with the telescoping facility? Well, Incra has your back no matter what your requirement is. Your every expectation will be met when you rely on Incra. This MITER1000GE is one of the expensive models of Incra. Despite being costly, it makes sure that each and every penny worth the deal.

Now coming back to its features, it’s made of high-quality stainless steel that is built to last. While other miter saws corrode and rust due to persistent use, this one ensures to withstand any unwelcoming mishaps.

Moreover, getting precise cuts with utmost accuracy is another plus helping it stand out from the crowd.

Here the biggest perk of this tool is the 18-31” telescoping miter fence that empowers you to work on different dimensions of wood.

Besides if you are failing to make repetitive cuts with your traditional table saw then the patented glide lock system with six expansion points will help you do the job effectively. It not only makes your project less time-consuming but also ensures accurate cuts without pause.

Last but not least it also includes 41 laser V-cut stops to maximize the accuracy level.

To conclude it’s a competent tool that scores in permanency, continuous cut, accuracy, portability, and reliability.

However, it has some subtle seatbacks, which might be a plunge for its value. Yet if you compare the effectiveness with the flaws, you will fathom the fairness.


  • Built to last construction
  • 41 laser V-cut for cutting at different sizes
  • Telescoping ability
  • Patented glide lock system with six expansion points
  • Increased accuracy


  • Instruction guide is vague
  • Hex keys don’t have sufficient torque

3. Incra MITERV27 Miter V27 Miter Gaug

INCRA MITERV27 Miter V27 Miter Gauge
  • Miter Gauge featuring 27 angle stops for precise...
  • No-nonsense design and compact size
  • Delivers extreme miter cutting accuracy
  • Four expansion points adjust for zero side play

On the contrary, to the previous product, this one is cheaper than most of Incra’s addition. We considered compiling it to the list so that you can have a budget-friendly option with high-quality assurance.

The best part of this range is that it fits well with most of the standard table saws.  This quality allows you to explore diverse woodworking projects on many levels.

Speaking of that, let us tell you that it has a universal mounting bracket so that newbies or dummy crafters don’t suffer from intimidation because this MITERV27 miter gauge has the utmost compatibility towards different user-made fences.

Moreover, it’s utterly easy to use as well as installing takes only 5 minutes. Apart from the superior compatibility option, this one also features the AngleLOCK indexing system that facilitates esteemed accuracy on different metrics. Besides the GlideLOCK miter bar peaks in terms of stability.

In conclusion, this one is made in the USA, which is one of the rarest things you will find nowadays. Hence the quality is guaranteed! And to be honest, at this price range, having a tool like this would be a win-win for you.


  • Universal mounting bracket
  • High-level accuracy
  • Easy to install
  • Steal for the money
  • Mad in the USA


  • Adjustment settings might feel flimsy

4. POWERTEC 71005 Deluxe Table Saw Miter Gauge

POWERTEC 71005 Deluxe Table Saw Miter Gauge
  • INCLUDES: (1) Table Saw Miter Gauge
  • FUNCTION: Provides you with a premium table saw miter...
  • FEATURES: Positive stops at all common angles for...
  • COMPATIBILITY: Fits and accommodates most standard 3/4...

Are you struggling to make cross-cuts with your ordinary miter gauge? Worry not! We appreciate all your endeavors and try to mitigate your hassles.

Presenting POWERTEC 71005 Deluxe table saw miter gauge that makes your cross-cutting task easier than ever.

It not only guarantees to make seamless cross-cut but also ensures high-level accuracy in precision. In fact, you can cut them at any standard angle.

Besides this tool has a positive lock system at the popular angles that many woodcutters prefer to use on a daily basis.

While doing your project on these positive angles, you don’t need to stress over the accuracy and quality.

Because this feature will take care of it no matter which angle you are working on. just simply follow the instruction to activate the positive stops at your desired angle and disengage when not in use. Furthermore, it reigns over in terms of comfort.

The ergonomic grip reduces the fatigue and pressure from your hand so that you can work with utmost alleviation. Also, the handles are very strong and stable.

No wonder you have superior control over your task as well. Moreover, you can remove any “play” by simply drilling down some screws. Initially, you’ll have a tip-resistant washer to stabilize the unit. Now, about compatibility, it easily suits most of the standard miter slots.

For instant ¾ x 3/8 inch miter slot, t slotted miter slots, without t slotted miter saws and some different models of tables saws like Delta, Jet, DeWalt, Bosch, Craftsmen, etc. So it’s quite evident now that you don’t need to invest in multiple miter gauge in order to be compatible with different table saw ranges.

When you get this one, half of your money and labor is saved. Made with a combination of a high-quality aluminum head and solid steel miter bar, this woodworking gauge was built for professional use and long-term durability.

To conclude, the build is immensely competent. The quality aluminum head, including the solid steel miter bar, ensures the durability of this tool.


  • Weighs only 3.3 pounds
  • Supremely compatible
  • Positive stops at the popular angles
  • Premium build material
  • Attractive price
  • Easy to install


  • Washer is hard to remove

5. SKIL 3410 Table Saw Replacement Miter Gauge Assembly

SKIL 3410 Table Saw Replacement Miter Gauge Assembly # 2610011708
  • Includes (1) 2610011708 Miter Gauge.
  • Genuine Skil Replacement Part.
  • New, Bulk Packed.
  • Cut angles from 0 to 45 degrees.

Many potential reviewers have rated it as their number 1 pick because of its affordability.

As we are curating products from all categories in terms of quality, we thought of including it as our top 5th pick. Now, undoubtedly it’s one of the cheapest miter gauges that outshines many expensive products due to its decent performance.

It provides a 10-inch cutting blade which is utterly sharp and powerful. With the caliber of 15 amp electric motor, it can easily cut through heavy woodblocks swiftly.

And at this rate, you can complete many professional heavy-duty crafting projects as well. Besides, it has a cutting height volume of 3 ½ inches. Consequently, it helps you to accomplish your various cutting needs.

Here’s the most enticing part — the storage convenience. As many woodworkers suffer from lack of space to keep all the tools collectively, SKILL features a built-in folding stand to solve this problem.

Hence it takes a little space in your workplace and allows you to work in a breeze. You can also store the equipment in your garage or storeroom. On the flip hand, when it’s unfolded, it does offer 20 inches of space.

And it’s only conceivable if you opt for the elastic cast aluminum surface. It can easily stretch from 20x 26 inches to 20×32 inches. Thus, working with larger wood sheets won’t be a headache anymore.


  • Up to 20-inch capacity
  • Powered with 15 amp electric motor
  • High-quality build
  • Expandable cast aluminum table
  • Saves up space
  • 0 degrees to 47 degrees bevel angle spectrum
  • 3½ inches cutting height


  • Markings on the dial are quite hard to read

6. KREG KMS7102 Table Saw Precision Miter Gauge System, Blue

Kreg KMS7102 Table Saw Precision Miter Gauge System, Blue
  • Factory Calibration. Guaranteed out of the box to .003...
  • Gauge head is CNC machine perfectly square to the bar...
  • Vernier scale allows fast, 1/10th-degree angle...

Do you already have a miter gauge from Incra or DEWALT? Probably you want to try something else that comes with different features.

And to grant your wish, we have included KREG KMS7102 precision miter gauge system in our top 7 list.

The most amazing fact of this brand is that they don’t compromise quality in terms of accuracy and better calibration. KREG honors its claim in delivering high-quality features for DIY’ers, woodworkers, repair, home improvement, and other projects.

From ensuring accuracy in the rugged aluminum fence to the sturdy swing stop; KREIG has everything covered!

The accuracy level is 0.003”  at 6” which speaks for its factory calibration. It takes less than 30 minutes to assemble. Installing this miter gage system is an absolute breeze. Besides, it distributes an anodized aluminum bar that comes with multiple adjustments in different perimeters.

With a twist of the screwdriver, you can adjust the settings in order to eliminate all the play in your miter slot. Needless to say, the aluminum bar is supremely straight (24 inches (610mm)  3/8 inch(9.5mm) thick by 3/4 inch(19mm) and ensures high-level accuracy in your project.

Moreover, this miter gauge also provides stops at popular angles (0°, 10°, 22.5°, 30°, and 45°) so that you can work with optimal rigidity and precision.

This tool features a vernier scale for 1/10 degree adjustment and micro-adjustments too.  Hence, you can have more detailed and versatile cuts without any fumbles.

Nonetheless, let us mention that the screws which come along the packaging are a bit weak. Thus, you need to be a little extra careful to prevent damage. Otherwise, you are good to go.


  • Precision lens cursor allows easy swing stop application
  • No Play at all
  • Positive stops and popular angles
  • Easy to install
  • Strong build
  • Enhanced accuracy
  • Value for money


  • No expandability
  • Weak screws

7. Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10
  • Ryobi Part # 089037007707
  • ass'y miter gauge
  • Always Check Owners manual For Proper Part number
  • Compatible with :Ryobi RTS10 10 Inch Table Saw

There’s nothing much to say about this miter gauge. It’s basically made for the newbies who want to learn basic crafting and enhance their skills gradually. Also, it’s a very good investment for the beginning.

You will get it at the lowest price possible compared to other products on this list. However, Genuine Ryobi miter gauge is made in the USA; hence even if it’s made of plastic material, it has quality as well as durability.

But make sure you know how much you are paying. Because at this low cost expecting something exceptional will sound like making a castle in the air.

Now about its dimension, the top width is 5/8” and the bottom width is 13/16 inches, which are pretty decent for your basic wood cutting.

Moreover, it comes with a 10.5 inches sharp blade to give you a seamless cut with accuracy.

Furthermore, this miter gauge for Ryobi table saw might not fit into all models or miter slots. You will get what you pay for. Hence, if you are looking for something cheap that holds your workpiece at few set angles while cutting them on Ryobi table saws, then this will do just fine!


  • Made in the USA
  • Easy to assemble
  • Fairly affordable
  • Fits into Ryobi 10 inch table saws ideally
  • Superior portability for user’s comfort


  • Wears and tears due to persistent use
  • Not a precision tool

Things to Consider Before Buying

Getting the best-rated table saw miter gauge isn’t a cup of tea. Mostly when the marketplace is filled with scams and exaggeration, therefore, you need to be sensible and take a few things under your consideration before purchasing! Check out the buying guide below.

Material and Components

Quality material and effective components are two attributes that reside in an ideal miter gauge. Hence while shopping for your miter gauge system, make sure you check out its entire build and components.

The build should be sturdy and competent enough to hold your workpiece with utmost rigidity. To do that you should always opt for steel or aluminum material.

These are the most high-profile materials that guarantee permanency. Also, these can withstand wear and tear.

There are also other options available such as wood or plastic made miter gauge. But it’s blatantly not a good choice as far as you are looking for in the long run.

Now about the components;  make sure you inspect all the additional tool that comes with it. Evaluate them properly by making a comparison with the price range and go for a suitable one.


The second important factor is comfort. You surely don’t want something which is hard to install and feels uncomfortable to use, right? That’s why you should look for comfort and ease of use.

Something that doesn’t feel harsh against your palms and slide in smoothly. Thus, working will feel like an absolute breeze, and it will be less time consuming as well.

Moreover, check out the weight of your miter gauge. Too heavy or too light is always contradictory to your buying standards. Always choose something in between which isn’t too heavy, neither too light but can be carried easily.

Angle Capacity

Why do you use a miter gauge? It’s basically for stabilizing the workpiece at an established angle and cut it with the table saw.

So it’s pretty obvious that your miter gauge should have popular angle stops. And depending on how many degrees of angle your miter gauge can set measures the gauge capacity of your tool. Now, the standard range is 120 degrees starting from 0 degrees.

And the largest you can find is 180 degrees with 25 angle stops. Getting a miter gauge with a 180-degree gauge capacity might be overkill for your task and money. Thus, sticking to the standard angle will be wise if you aren’t looking for something extreme.


Always make sure to choose a miter gauge that is compatible with the table saw, or most of the table saw models. It will save up your future investments by meeting your various crafting needs.

Nuanced Features

These aren’t compulsory but also can’t is overlooked. Look for some accessories or nuanced features like a locking mechanism, fence attachment, ergonomic grip or handle, etc. Also, having an instruction manual will be great for clarity.

How to Use a Miter Gauge Properly?

The process of using a miter gauge might seem easy in the demonstration videos you see on youtube, but in reality, it needs the expertise to get accurate cuts. And by multiple attempts, slowly, you will learn the art of cutting objects like a pro.

So there are basically two types of cuts — square cuts, and angle or special cuts. Let’s see the process one by one.

Square Cuts

  • First thing first, make sure you have a strong work surface to give proper support to all the objects
  • Now set the miter gauge at 90 degrees accurately — make sure it’s seamless
  • Secure the system and make sure you don’t leave any space between the gauge and the table
  • Fasten tightly to hold it to the bottom
  • Now establish the miter gauge in the proper manner so that the blade slides in smoothly towards the desired measurement.
  • Finish the cut by returning back to its starting point, and thus your will get precise square cuts

Angle or Special Cuts

Now while making an angle cut or special cut, there are some subtle differences. Otherwise, the process is similar to the basic square cutting process.

And the differences are including a fixture, customizing your rip measurements, leaving space for the markings, setting up the miter gauge at 45 degrees or any popular stop angle you want, drilling some holes, using screws to secure them, and finally making a cut.

To have a more precise idea, you can read the manual that gives you the basic idea of making special cuts from a particular miter gauge.

Frequently Asked Questions

Here are some frequently asked questions to eliminate your further queries.

What is the standard slot size of a miter gauge?

Well, the standard slot size of a miter gauge is are 3/4” x 3/8” with a 1/8” “T” slot.

Does the miter gauge need to be portable?

Yes. They should be portable. But buying a miter gauge that is too thin won’t be sturdy enough. Also, a tool that is too heavy will also hinder the user’s comfort. Thus, make sure your miter gauze is neither too thin nor too heavy.

Do I need to take any safety precautions to use a miter gauge?

It’s not a tool that is used individually. You need to attach it to other objects in order to complete your tasks. And in woodworking taking a few safety precautions is necessary.

As turning off the electric table saws when not in use, wearing eye-protecting goggles, ear defender, gloves, etc. However, miter gauge doesn’t do any harm to you.

Am I supposed to buy a miter gauge that also has the same model as my table saw?

Not necessarily; some miter gauges are made for universal use with common angle stops. Some miter gauge fits into different table saw models. But if you have both tools from similar models, then it’s not a problem but advantage.

Can I attach a fence with my miter gauge?

Yes, but your gauge requires an attachment fixture for that.

What should I do to make it long-lasting?

Well, as there’s no need for maintenance in miter gauges, the only thing you can do is keeping them clean and away from direct sunlight exposure or water contact. Also, don’t overwork.

End Quote

Did you make this far? You should be able to choose the ideal one for you already.

If you are having trouble making an apposite decision you don’t have to rush over things!

Take your time and focus on your top priorities, requirements, and finally, your budget! Then choose anything that just fits well without causing you any contingent problems. Hope this review was helpful.

Last update on 2023-01-13 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment